In the inventory background, where you set model, and x,y.. I can't get "armored transport - colonist transport" to load correctly, i've tried setting 200 height and 2000 width, and the image showed finally, but awful looking of course.. if I use 800x800, it loads like inside the model..
Under the model there are three camera fields, for planet panel, tech purchase and unit glossary. I would guess that the inventory camera uses one of these fields. The colonist transport model has the default "Star2Camera01" for all of them, but units which are known to work correctly with the inventory model use different values. For example, a marine has "Star2CameraMid03"
Many thanks I should have asked the question, but wasn't thinking about it... Is it possible to turn the model.. Like the hellion is kinda at a 45 degree camera angel, so it shows the side a bit right.. The colonist vehicle I am working with, as well as many other like models show in the previewer facing straight towards you, so you can't see the side.
Either way, many thanks Riley to your suggestion after looking at a Thor, colussus and seige tank, I figured a rough place to start with cameras, and got it working nice now, just wish i could turn the model..
I'm going to continue experimenting with different set cameras already to see if I can get the desired effect and I will reply back.
edit: In the cameras data type, I am failing to understand where the preset cameras "Star2CameraHigher04" are generated, as to copy and edit the camera pitch,yaw kinda thing..
In the inventory background, where you set model, and x,y.. I can't get "armored transport - colonist transport" to load correctly, i've tried setting 200 height and 2000 width, and the image showed finally, but awful looking of course.. if I use 800x800, it loads like inside the model..
any ideas?
bump?
@Demalii:
Under the model there are three camera fields, for planet panel, tech purchase and unit glossary. I would guess that the inventory camera uses one of these fields. The colonist transport model has the default "Star2Camera01" for all of them, but units which are known to work correctly with the inventory model use different values. For example, a marine has "Star2CameraMid03"
That would be the prime area to investigate.
Many thanks I should have asked the question, but wasn't thinking about it... Is it possible to turn the model.. Like the hellion is kinda at a 45 degree camera angel, so it shows the side a bit right.. The colonist vehicle I am working with, as well as many other like models show in the previewer facing straight towards you, so you can't see the side.
Either way, many thanks Riley to your suggestion after looking at a Thor, colussus and seige tank, I figured a rough place to start with cameras, and got it working nice now, just wish i could turn the model..
I'm going to continue experimenting with different set cameras already to see if I can get the desired effect and I will reply back.
edit: In the cameras data type, I am failing to understand where the preset cameras "Star2CameraHigher04" are generated, as to copy and edit the camera pitch,yaw kinda thing..